HOBO UX90-001 State/Pulse/Event/Runtime Data Logger (128K)
- In stock, only 6 left
- Available to order
| HOBO Product Series | UX90 |
|---|---|
| Measurements | Event, Pulse, Runtime, State |
| Data Available By | Display, USB |
Specifications
Logger |
|
Time accuracy |
±1 minute per month at 25°C (77°F) |
Battery Life |
1 year, typical with logging intervals greater than 1 minute and normally open contacts |
Memory |
UX90-001: 128 KB (84,650 measurements, maximum) |
Download Type |
USB 2.0 interface |
Download Time |
10 seconds for 128 KB |
Logger Operating Range |
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing); Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification |
LCD |
LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range |
Size |
3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.) |
Weight |
23 g (0.81 oz) |
Environmental Rating |
IP50 |
Supported Measurements |
|
Supported Measurements |
Event, Kilowatt Hours (kWh), Motor On/Off, Pulse Input, Runtime, State Open/Closed, Water Flow |
One logger with 4 recording modes |
|
Internal reed switch can be used to determine when a door or window is open or closed |
|
Compatible with a wide range of external sensors |
|
Internal Sensor |
|
Maximum State, Event, Runtime Frequency |
1 Hz |
Preferred Switch State |
No magnet present (normally open) |
External Input |
|
External Contact Input |
Electronic solid state switch closure or logic driven voltage output |
Range |
0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered) |
Maximum Pulse Frequency |
50 Hz |
Maximum State, Event, Runtime Frequency |
1 Hz |
Pulse, Event Lockout Time |
0 to 1 second in 100 ms steps |
Solid State Switch Closure |
Input Low: < 10 KΩ; Input High: > 500 KΩ |
Internal Weak Pull-Up |
100 KΩ |
Input Impedance |
Solid state switch closure: 100 KΩ pull up |
Logger |
|
Resolution |
Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event |
Logging Rate |
1 second to 18 hours, 12 minutes, 15 seconds |
Full details are in the datasheet and manual under Resources & Downloads.
- HOBO UX90-001 State Data Logger
- 2.5 mm input cable
- Command™ strip
- Double-sided tape
- Hook & loop strap
- Magnet with 2 screws
This item is priced on application. Tell us what you need and we'll send you a quote.
Need a quick answer? Use live chat. For quotes or detailed requirements, send us the details and we'll reply by email.
Or call us on 01243 558270
BUYING IN BULK, OR JUST WANT SOME HELPFUL ADVICE?
Call +44 (0)1243 558270, or fill out our contact form.
The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This data logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Data Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory version (UX90-001M) capable of over 346,795 measurements.
Features:
- One data logger with 4 recording modes
- Internal reed switch can be used to determine when a door or window is open or closed
- Compatible with a wide range of external sensors
- Ships with 2.5 mm input cable (CABLE-2.5-STEREO)
NOTE: HOBO loggers require a USB cable and HOBOware software (free download).